Acceptance by Plasma Coating Corporation (“PCC”) of this order is expressly limited to the terms and conditions contained herein. Any terms proposed by Purchaser are hereby rejected unless otherwise accepted by PCC in writing.

1. PCC order acceptance and payment terms are subject to credit investigation and approval.
2. Whenever PCC is provided material/parts with detailed instructions as to processing requirements, PCC responsibility
   shall end with the carrying out of the instructions.
3. Type of material, heat treat, tolerances and specifications for processing shall be given in writing prior to processing.
4. Unless otherwise specified in writing, PCC requires a one percent (1%) scrap allowance.
5. The Purchaser shall retain title and risk of loss for all material/parts provided to PCC except as specifically provided
   herein or otherwise agreed to in writing by PCC.
6. PCC liability for any cause is limited to the cost of direct labor and material of the material/parts directly damaged by
   PCC processing or two (2) times the PCC processing charges on such material/parts, whichever is the lesser.
   Charges for services are based on this policy limiting PCC liability. Only when agreed upon in writing will PCC assume
   greater liability. In such event a higher charge may be made for PCC services.
7. Material/parts processed by PCC shall be accepted as satisfactory by you if PCC is not notified of damages, shortages
   or other discrepancies within fifteen (15) days of your receipt.
8. Rejected material/parts must be returned to PCC for rework. Further processing or assembly of unsatisfactory
   material/parts by you or any other party shall constitute a waiver of any liability on PCC’s part.
9. Where operations or processes performed by PCC are in the nature of "salvaging" material/parts or if the
   material/parts are to be stripped and reprocessed after being processed by others, the work is accepted on a "best
   effort" basis and no liability shall attach to PCC unless previously agreed upon in writing prior to processing the job.
   Whether or not the attempted salvage operation is successful, PCC will bill for and be paid for all time and material
   expended in this effort.
10. In the event that results of processing operations are unsatisfactory due to metal imperfections, changes in grade or
    composition of materials, manufacturing and/or fabrication imperfections, usages for which the processing or other
    finishing operations was not reasonably designed or similar conditions over which PCC has no control, the customer
    is still liable for the contracted amount for the processing operations performed.
11. Price breaks, if any, are for quantities of material/parts received for processing at one time.
12. All orders are quoted f.o.b. Plasma Coating Corporation, Gardena, California, unless otherwise agreed upon in
    writing.

We believe these conditions are realistic and reasonable enabling us to provide quality metal finishing at an economical price. Your placing of orders with us shall indicate your acceptance of our limitation of liability and other provisions set forth herein.

Plasma Coating Corporation is an equal opportunity/affirmative action employer.
Effective Date: 08/14/06